Sealand DTM01C Tank Monitor Manual de usuario descargar pdf (Pagina 3)

2 General safety instructions

The manufacturer will not be held liable for claims for damage resulting from the following:

• Faulty assembly or connection

• Damage to the unit from mechanical inuences, misuse or abuse

• Alterations to the unit without express written permission from the manufacturer

• Use for purposes other than those described in the operating manual

Dometic Tank Monitor General safety instructions

3 Intended use (g. , page 2)

DTM01C Tank Monitor panel indicates when a wastewater holding tank is almost full. This monitor helps

prevent damage to the boat that can happen because of accidental overlling of the holding tank.

Caution!

Operator must know local regulations for emptying a holding tank.

4 Components and Functions

Probe Cap with Float Switch

The probe cap installs into a threaded 3-inch (76 mm) FPT opening on the top of a Dometic

holding

tank or other holding tank equipped with such an opening. As the level of holding tank contents

rises, the oat switch inside the tank is pushed upward and activates the “Full Tank” light on the

indicator panel.

Indicator Panel

The indicator panel has a single light which is activated by the oat switch inside the holding tank.

When the “Full Tank” light is activated, the operation of any plumbing xture connected to the

holding tank should stop until the tank is emptied.

Items in ﬁg. , page 2 Description

1 Probe cap with ﬂoat switch

2 Indicator panel

3 #6 fasteners

5 Speciﬁcations

5.1 Materials

Average current consumption: 0.016 amps at 12 V DC. Requires 0.5-amp fuse.

5.2 Electrical Current Draw

ISO8846; EMC Directive 2004/108/EC

5.3 Approvals

Panel frame: ABS

Panel: Polyester

Probe cap: PVC

Float switch: Nitrile rubber ebonite

1 2 3 4 5 6 7 8 ... 47 48

Sin comentarios

Sealand DTM01C Tank Monitor Manual de usuario Pagina 3